| Programmable
controllers |
| PC-835
series |
| PC-855
series |
| 16 steps/pattern by 20 patterns, max. up to 320 steps are |
 |
| applicable for program linkage. |
| Accuracy of ±0.1% with sampling period of 0.1 seconds,
meets |
| the needs of complex process control. |
| Interactive setting system by the LCD allows easy specification
setting.. |
| Adding an external memory as an option enables data saving/load.
|
|
| Input |
: |
Thermocouple, RTD, DC Current, DC Voltage |
| Accuracy |
: |
Within ±0.1%FS±1digit |
| Sampling period |
: |
0.1seconds |
| Control action |
: |
Auto-tuning PID, PD, ON/OFF |
| Control output |
: |
Relay contact, Non-contact voltage, DC Current |
| Power supply |
: |
100 to 240V AC 50/60Hz |
| Number of patterns |
: |
20 (linkable between patterns) |
| Number of steps |
: |
320 (16 steps/pattern) |
| Number of repeat |
: |
10000 times |
| Option |
: |
Pattern number external selection, Time signal output,
Transmission output |
|
|
Serial communication, Heating/Cooling control, External
memory, etc. |
| Programmable
controllers |
| PC-935
series |
| PC-955
series |
| 10 steps/pattern by 10 patterns, i.e. max. 100 steps are
applicable |
 |
| for program linkage. |
| Fuzzy algorithms make step changes more accurate. |
| Specification setting and changes can be easily performed
with |
| multi-range and multi-function. |
| Safety standards based on UL/CSA, CE marking. |
|
| Input |
: |
Thermocouple, RTD, DC Current, DC Voltage |
| Accuracy |
: |
Within ±0.2%FS±1digit |
| Sampling period |
: |
0.125 seconds |
| Control action |
: |
Fuzzy overshooting protective PID, Auto-tuning
PID |
| Control output |
: |
Relay contact, Non-contact voltage, DC Current |
| Power supply |
: |
100 to 240V AC 50/60Hz, 24V AC/DC 50/60Hz |
| Number of patterns |
: |
10 (linkable between patterns) |
| Number of steps |
: |
100 (10 steps/pattern) |
| Number of repeat |
: |
9999 times |
| Option |
: |
Alarm 2, Loop break alarm, Heating/Cooling control, Serial
communication |
|
|
Set value digital transmission,
etc. |
| Programmable
controllers |
| PCD-33A series |
| Program can be easily set by inputting step temperature and step
time |
 |
| to each step. |
| Communication method can be chosen from five types; Shinko
protocol, |
| Setting value digital transmission, Setting value digital reception,
Modbus |
| ASCII and Modbus RTU mode. |
| IP66 structure allows usage in harsh environments when the controller
|
| is exposed to water or dust. |
|
| Input |
: |
Thermocouple, RTD, DC Current, DC Voltage |
| Accuracy |
: |
Thermocouple; Within ±0.2% of input span ±1digit |
|
|
RTD; Within ±0.1% of input span ±1digit |
|
|
DC Current; Within ±0.2% of input span ±1digit |
|
|
DC Voltage; Within ±0.2% of input span ±1digit |
| Sampling period |
: |
0.25 seconds |
| Control action |
: |
Auto-tuning PID, PI, PD, P, ON/OFF |
| Control output |
: |
Relay contact, Non-contact voltage, DC Current |
| Event output |
: |
Time signal output, Pattern end output, RUN
output |
| Number of patterns |
: |
9 patterns (unlinkable between patterns) |
| Number of steps |
: |
9 steps |
| Power supply |
: |
100 to 240V AC 50/60Hz, 24V AC/DC 50/60Hz |
| Options |
: |
Serial communication (RS-485), Set value digital
transmission, etc. |
|
|
