| |
|
|
| |
| Digital indicating
controllers |
| JCS, R, D-33A
series |
| Multi-input of thermocouple (10 types), RTD (2 types) |
 |
| DC current (2 types) and DC voltage (4 types) |
| Memory function is equipped as standard and can be switched |
| between SV1 and SV2 by remote contact signal. |
| Communication function for the Shinko or Modbus protocol |
| (ASCII and RTU mode) are available. |
| IP66 structure allows usage in harsh environments when the |
| controller is exposed to water or dust. |
|
| Input |
: |
Thermocouple, RTD, DC current, DC
voltage |
| Accuracy |
: |
Within ±0.2% of each input span
±1digit |
| Sampling period |
: |
0.25 seconds |
| Control action |
: |
Auto-tuning PID, PI, PD, P, ON/OFF |
| Control output |
: |
Relay contact, Non-contact voltage, DC
current |
| Supply voltage |
: |
100 to 240V AC 50/60Hz, 24V AC/DC
50/60Hz |
| Option |
: |
Alarm 2, Heating/Cooling control, Heater burnout
alarm, Loop break alarm, |
|
|
SV1/SV2 external selection, Serial communication
(RS-485), etc. |
| Digital indicating
controllers |
| JCM-33A series |
| Multi-input of thermocouple (10 types), RTD (2 types) |
| DC current (2 types) and DC voltage (4 types) |
| Memory function is equipped as standard and can be switched |
| between SV1 and SV2 by remote contact signal. |
| Communication function for the Shinko or Modbus protocol |
| (ASCII and RTU mode) are available. | |
|
 |
|
| Input |
: |
Thermocouple, RTD, DC current, DC
voltage |
| Accuracy |
: |
Within ±0.2% of input span ±1digit |
| Sampling period |
: |
0.25 seconds |
| Control action |
: |
Auto-tuning PID, PI, PD, P, ON/OFF |
| Control output |
: |
Relay contact, Non-contact voltage, DC
current |
| Supply voltage |
: |
100 to 240V AC 50/60Hz, 24V AC/DC
50/60Hz |
| Option |
: |
Alarm 2, Heating/Cooling control, Heater burnout
alarm, Loop break alarm, |
|
|
SV1/SV2 external selection, Serial communication
(RS-485), etc. |
| Digital indicating
controllers |
| FCS-13A, -23A
series |
| FCR-13A, -23A, -15A
series |
| FCD-13A, -15A
series |
| FC series is a high performance controller applicable |
 |
| to temperature control as well as for process |
| control. PID control action with fuzzy self tuning |
| enables stable control for a variety of processes. |
| Simplified programmable function is provided so that
controllers |
| in this series can serve as programmable controllers. |
|
| Input |
: |
Thermocouple, RTD, DC current, DC
voltage |
| Accuracy |
: |
Within ±0.2%FS±1digit |
| Sampling period |
: |
0.125 seconds |
| Control action |
: |
Fuzzy self tuning PID, Auto-tuning PID, PD,
ON/OFF |
| Control output |
: |
Relay contact, Non-contact voltage, DC
current |
| Supply voltage |
: |
100 to 240V AC 50/60Hz, 24V AC/DC
50/60Hz |
| option |
: |
Alarm 2, Heating/Cooling control, Heater burnout
alarm, Loop break alarm, |
|
|
Transmission output, Serial communication, Set value
memory, etc. |
|
|
|
