| |
| DIN
rail mounting type indicating controllers |
| DCL-33A
series |
| Compact size 22.5mm(W) x 75mm(H) x 100mm(D) with DIN rail |
 |
| controller can be easily installed inside the control panel.
|
| Only units with current output type can be easily configured to
a |
| a transducer by key operation. When this controller may be used as
a |
| transducer, isolated 4 to 20mA DC signal is outputted after
converted |
| from Thermocouple or RTD input. |
|
| Input |
: |
Thermocouple, RTD, DC current, DC
voltage |
| Accuracy |
: |
Within ±0.2% FS ±1digit |
| Sampling period |
: |
0.25 seconds |
| Control action |
: |
Auto-tuning PID, PID, PI, PD, P,
ON/OFF |
| Control output |
: |
Relay contact, Non-contact voltage, DC
current |
| Supply voltage |
: |
100 to 240V AC 50/60Hz, 24V AC/DC
50/60Hz |
| Option |
: |
Heater burnout alarm, Serial communication
(RS-485) |
|
